Paving comparison

Driveway Pavers Compared: Sandstone, Brick, Concrete or Setts?

Sandstone, concrete pavers, recycled brick, stone setts or a concrete slab: thickness and base for cars, oil stains, cracking, repairs and relative cost.

Sydney home with a sandstone paver driveway edged in recycled red brick, next to a neighbour’s concrete driveway

The short answer

Choose 75–100mm sandstone pavers if you want a natural stone driveway that suits a sandstone or heritage home and can be lifted and relaid. Choose concrete pavers for a lower-cost, uniform unit paver. Choose recycled bricks laid on edge in herringbone for period character. Choose granite or bluestone setts for a hard-wearing feature that hides stains. Choose a plain or exposed-aggregate slab for the lowest upfront cost, accepting cracks and visible repairs.

Which option suits which project

Sandstone pavers

Best for: Natural stone drives for sandstone and heritage homes

View sandstone pavers

Concrete pavers

Best for: Lower-cost, uniform unit paving for long drives

Recycled brick pavers

Best for: Period character on Federation and Victorian homes

View recycled brick pavers

Granite or bluestone setts

Best for: Hard-wearing feature aprons and cobbled looks

Concrete slab

Best for: The lowest upfront cost on long, plain drives

Side-by-side comparison

Sandstone paversConcrete paversRecycled brick paversGranite or bluestone settsConcrete slab
What it isSawn or split natural sandstone, 75–100mm thickFactory-made interlocking or rectangular unitsReclaimed clay bricks laid on edgeSmall, roughly cubic blocks of very hard stonePoured reinforced concrete, plain or exposed aggregate
Thickness for cars75mm minimum; 100mm for heavy or steepVehicle ranges commonly 60–80mmAbout 110mm deep on edgeVaries with sett sizeCommonly 100mm or more, reinforced
Base150–200mm compacted road base or reinforced slabCompacted road base, bedding sand, edge restraintCompacted base, sand bed, firm edge restraintUsually mortar on a concrete slabCompacted subgrade and crushed rock
Oil stainsPorous: seal and blot spills quicklyStains, but units can be swappedStains blend into weathered brickDense and textured; shows littleStains readily; hard to remove fully
Cracking and movementFlexible on sand; on a slab follows the slabFlexible; joints absorb movementFlexible; herringbone resists creepRigid bed can crack with the slabCracks; control joints guide where
RepairsLift and relay; keep spare paversLift and relay single unitsLift and relay; reclaimed bricks blend inChip out and reset in mortarPatches show; bays often replaced
Kerb appealWarm natural stone that suits Sydney homesNeat and uniform, many coloursWarm red period characterOld-world cobbled texturePlain; exposed aggregate adds texture
LayingHeavy stone; skilled cuttingQuickest of the unit paversLabour-intensive; many herringbone cutsSlow, skilled workTrade job: formwork, pour and finish
Relative costMid to high; priced by thicknessUsually below natural stoneAbout $81/m² of bricks on edge (guide)Usually the highest per m²Plain slab usually lowest
Best forSandstone and heritage homes, curved drivesBudget drives and long runsFederation, Victorian and terrace frontagesEntry aprons, borders and feature stripsLong, plain drives on a budget
Sold by Stone FrontYesNoYesNoNo

Thicknesses and bases are general guides; your installer or engineer sets the final specification for your soil and vehicles.

Driveway pavers carry car loads, turning tyres and oil drips for decades, so thickness and base matter far more than on a patio. Five options cover most Sydney driveways: sandstone pavers, concrete pavers, recycled bricks laid on edge, granite or bluestone setts, and a poured concrete slab, plain or exposed aggregate. Here is how they compare.

What are the main driveway paving options?

The main driveway paving options are natural stone pavers, manufactured concrete pavers, clay bricks, stone setts and poured concrete. Sandstone driveway pavers are sawn modular paving, sawn flagging or track-grade handsplit flagging 75–100mm thick. Concrete pavers are factory-made units, often in interlocking shapes, made in vehicle-rated thicknesses. Recycled bricks are reclaimed clay bricks cleaned of lime mortar and laid on edge, usually in herringbone. Setts are small, roughly cubic blocks of very hard stone such as granite or basalt. A poured slab is reinforced concrete finished plain, broomed, coloured or with the surface washed off to expose the aggregate.

How thick should driveway pavers be, and what base do they need?

Driveway pavers need to be thicker than path pavers and sit on a deeper, compacted base. For sandstone, use 75mm minimum where cars drive and 100mm for heavier vehicles or steep driveways, on 150–200mm of compacted road base or a reinforced concrete slab.

OptionTypical thickness for carsUsual base
Sandstone pavers75mm; 100mm for heavy or steep150–200mm compacted road base or reinforced slab
Concrete paversCommonly 60–80mm vehicle rangesCompacted road base, bedding sand, edge restraint
Recycled bricks on edgeAbout 110mm deepCompacted base, screeded sand, firm edge restraint
Granite or bluestone settsVaries with sett sizeUsually a mortar bed on a concrete slab
Concrete slabCommonly 100mm or more, reinforcedCompacted subgrade and crushed rock

Edge restraints matter for every unit paver: without a concrete haunch or kerb along the sides, pavers creep outwards under tyres. Our sandstone driveway guide covers base depths, edging and falls in detail.

Steep driveways need extra care whatever the material. Use the thicker end of the range, such as 100mm sandstone, a rigid or very well-compacted base and a textured surface that tyres and shoes can grip. Water running down a long slope also needs somewhere to go, so plan a grated strip drain across the bottom of the drive and at the garage door, and fall the paving away from the house.

Which driveway pavers hide oil stains best?

Dense, darker or textured surfaces hide oil stains best, so granite and bluestone setts and weathered recycled bricks show drips least, while pale, porous surfaces show them most. Sandstone is porous, so seal driveway pavers with a penetrating sealer and blot spills quickly; sealing buys you time to clean oil before it soaks in. Concrete pavers stain too, but a badly marked paver can be lifted and swapped. A poured slab is the hardest to fix, because oil soaks into the concrete and cleaning often leaves a lighter patch.

On any surface, act quickly: soak up fresh oil with an absorbent such as kitchen paper or cat litter, then wash the area with a degreaser suited to the material. Never use acid cleaners on sandstone, and test any cleaner on a spare paver first.

Do paved driveways crack less than concrete slabs?

Pavers laid on a flexible sand bed rarely crack the way a slab does, because the joints let the surface move slightly with the ground. A poured slab is rigid: shrinkage, reactive clay soils and tree roots eventually crack it, and control joints are cut so cracks form in straight, planned lines. Any paving set in mortar on a slab, including setts and some sandstone driveways, follows the slab, so a crack below can show through the joints above. Where the ground moves, flexible pavers sink or lift locally instead of cracking.

Repairs follow the same pattern. Unit pavers can be lifted, the base fixed and the same pavers relaid, so keep a few spares from the original order. Concrete patches rarely match the surrounding colour or finish, so slab repairs often mean cutting out and replacing a whole bay.

Which driveway paving ideas add kerb appeal?

Materials that match the house add the most kerb appeal, because the driveway is often the largest hard surface on the frontage. Ideas that work on Sydney homes:

  • Sandstone with a sandstone or heritage house: the driveway picks up the walls, steps and edging in the same stone. See sandstone driveway pavers for formats and thicknesses.
  • Recycled bricks for Federation and Victorian homes: warm red recycled brick pavers laid in herringbone suit period frontages, and our recycled brick driveway guide covers patterns, quantities and base.
  • Mixed materials: a concrete or exposed-aggregate drive with sandstone or brick borders, or a band of setts at the entry, adds texture without paving the whole area in stone.
  • Crazy-paved drives: 75–100mm sawn flagging on a slab gives a jigsaw look; see crazy pavers compared.
  • Edge lighting: low solar lights along the edge mark the driveway line at night; see the driveway edge and path kit.

How much do driveway pavers cost?

A plain concrete slab is usually the cheapest driveway per square metre, exposed aggregate costs more, and stone setts usually cost the most. Concrete pavers generally sit below natural stone. Recycled brick pavers are $1.50 each (guide price), which is about $81 per m² of bricks laid on edge at 54 per m². Sandstone sawn modular paving starts from $65/m² at 50mm, and the 75mm and 100mm thicknesses that driveways need cost more because they contain more stone, so Stone Front quotes them by area and thickness. Excavation, base, edge restraints and labour often cost as much as the paving itself, so compare complete quotes.

Get a quote for sandstone driveway pavers

Send the driveway area, thickness, preferred product and suburb through the driveway paver quote form, and Stone Front usually replies the same business day.

Frequently Asked Questions

Can sandstone pavers go over an existing concrete driveway?

Yes, if the slab is sound, reasonably level and drains. The pavers are bedded in mortar on the slab, which then carries the load. Check finished heights at the garage door, house and footpath before committing, and expect existing cracks in the slab to reflect through the joints above.

Do I need council approval for a new driveway?

It depends on your council and site, but most NSW councils require an application for the driveway crossing between your boundary and the kerb, because that section sits on council land. Rules can be stricter in heritage conservation areas, so check with your council before ordering materials.

Is crushed sandstone an option for a driveway?

Yes, especially on rural and acreage properties. Compacted 75mm minus crushed sandstone forms a firm, free-draining driveway surface, often over 150mm minus where levels need building up. It costs less than paving but needs topping up and regrading over time, and it is less suited to steep drives where water scours the surface.

How heavy is the stone for a sandstone driveway?

Sandstone 75mm thick weighs about 173kg per m² and 100mm about 230kg per m². A 40m² driveway in 75mm pavers is therefore about 6.9 tonnes of stone, so it is delivered by flatbed or crane truck, and the drop point needs about 3.5m of width and firm ground.

Which paving pattern is strongest for a driveway?

For small units such as concrete pavers and bricks, herringbone laid at 45 or 90 degrees to the direction of travel interlocks best and resists creeping under turning tyres. Larger sandstone pavers rely more on their thickness and base, so 75–100mm stone on a well-compacted base or slab matters more than the pattern.

Stone Front products in this comparison

Get a quote