Parramatta, Blacktown & Penrith

Western Sydney Sandstone Supplies

Stone Front supplies sandstone paving, retaining blocks, crushed sandstone and edging across Western Sydney, from Parramatta, Westmead and Granville to Blacktown, Schofields, St Marys and Penrith. Everything is quarried at Glenorie; sawn modular paving starts from $65/m², rough squared blocks from $120/m² of wall face, and crushed sandstone base is quoted by the tonne.

Western Sydney has two very different sides. Parramatta’s colonial core includes sandstone buildings from Sydney’s first decades, with Victorian and Federation cottages in Harris Park, Granville and Westmead. Around Blacktown, Marsden Park, Schofields and Penrith, newer homes sit on cut-and-fill estates over reactive clay soils, and summers are hotter than on the coast. City of Parramatta, Blacktown, Penrith and Cumberland councils cover most of the area.

Paving on Reactive Clay: Get the Base Right

On Western Sydney clay, the base and drainage decide whether paving stays flat. Reactive clay swells when it gets wet and shrinks as it dries, so water sitting under paving is what lifts, sinks and cracks it. Excavate to firm subgrade, then lay at least 75mm of compacted crushed sandstone or road base plus 20–30mm of bedding sand for foot traffic, or 150–200mm of compacted road base or a reinforced slab for driveways.

Give every paved area a fall of about 1:60 to 1:100 away from the house and send runoff to a drain or garden bed, not along the slab edge. Crushed sandstone in 75mm minus compacts into a firm, free-draining base. Order the base material with the stone so it arrives on one delivery.

Hot Summers: Colours That Stay Cooler Underfoot

Western Sydney summer days run hotter than the coast, so colour choice matters for patios and pool areas. Lighter sandstone, such as Marbled White, White with Greys and Light Yellow, reflects more sun and stays cooler underfoot than Browns, Orange or Purples.

Around pools, sandblasted is the most slip-resistant finish and sawn also gives good grip. Seal outdoor sandstone with a penetrating sealer and reseal every 2–3 years; sealed stone also resists staining from sunscreen, barbecue fat and leaf litter.

Retaining Walls on Cut-and-Fill Estates

Most new Western Sydney estates are cut and filled, which leaves a retaining wall along at least one boundary. Rough squared blocks start from $120/m² of wall face, rockfaced from $180/m² and hydrasplit from $190/m²; a 10m wall 800mm high is 8m² of face, or about $960 of stone in rough squared blocks before capping, drainage, delivery and labour.

Drainage matters more than usual on clay, because clay drains slowly and water trapped behind a wall adds pressure. Lay a slotted ag pipe at the base with free-draining backfill and an outlet. Most NSW councils require approval for walls over about 600mm or close to a boundary, and you should engage an engineer for walls over about 1m.

Parramatta’s Colonial Sandstone and Older Homes

Many of Parramatta’s colonial buildings are sandstone, and many older homes nearby have sandstone foundations, steps and front walls. New stone can be selected to sit beside them: send photos of the existing stone and the quarry chooses a batch from the matching colour band, or supplies a single-colour selection.

Sandstone bricks, sawn to 230x110x76mm from $180/m², suit repairs, piers and garden walls that need to course in with old work, and recycled red bricks at $1.20 each suit heritage brick paving. Many councils in the area, including City of Parramatta and Cumberland, have heritage conservation areas, so check before changing a frontage.

Driveways and Bulk Base Material

Western Sydney blocks often have wide double driveways, so thickness and base volume drive the budget. Use 75mm-thick paving at minimum where cars drive and 100mm for heavier vehicles; sawn modular paving is made in 50, 75 and 100mm and has the lowest guide price in the paving range, from $65/m² at 50mm.

Work out base tonnage before ordering: tonnes = length x width x compacted depth (m) x 1.8–2.0. A 6m x 6m driveway with 150mm of compacted crushed sandstone base is 5.4m³, about 10–11 tonnes. Bulk loads come by tipper, and quarry-run colour pallets keep the stone cost down.

Current Stock

Western Sydney Paving, Walls and Base: Guide Prices

ProductFormatWestern Sydney useGuide price
Crushed sandstone (75mm minus)Per tonne, tipper deliveryFree-draining base on clayBy quote
Sawn Modular Paving50, 75 or 100mmPatios; double driveways at 75–100mmFrom $65/m² (50mm)
Rough Squared Blocks4m² of wall per palletBoundary and garden retainingFrom $120/m² of wall face
Hydrasplit Blocks110mm bed, clean split faceNeat estate boundary wallsFrom $190/m² of wall face
Sandstone Bricks230x110x76mm sawnHeritage repairs, piers, garden wallsFrom $180/m²
Sandstone EdgingHydrasplit or sawn, cut to lengthHolding paving edges on clayFrom $35 per lineal metre

Guide prices are for stone only, ex-quarry at Glenorie, in AUD. Delivery is priced on the quote by suburb, truck type and number of loads.

Applications

Where This Stone Works

Patios on a compacted base over clay
Cut-and-fill boundary retaining walls
Wide double driveways in 75–100mm
Light-coloured pool surrounds
Heritage repairs around Parramatta
Crushed sandstone base & paths

Get a quote from Stone Front

Step 1 of 2

Tell us which sandstone you need, roughly how much and your suburb. We reply with a price and delivery cost, usually the same business day.

Delivery Areas

Sandstone Delivered Across Sydney

Every pallet leaves the quarry at Glenorie in the Hills District and is delivered by flatbed or crane truck to sites across greater Sydney, the Central Coast and the Blue Mountains. Tell us your suburb when you request a quote and delivery is priced with the stone. Quarry collection is free.

Hills District

Castle Hill, Kellyville, Dural, Glenorie (quarry)

North Shore

Chatswood, Mosman, St Ives, Hornsby

Northern Beaches

Manly, Dee Why, Mona Vale, Avalon

Eastern Suburbs

Bondi, Randwick, Vaucluse, Maroubra

Inner West

Marrickville, Leichhardt, Strathfield, Balmain

Sydney CBD & Inner City

Surry Hills, Paddington, Glebe, Pyrmont

Sutherland Shire & Southern Sydney

Cronulla, Miranda, Engadine, Hurstville

Western Sydney

Parramatta, Blacktown, Penrith, Rouse Hill

South West Sydney

Liverpool, Camden, Campbelltown, Narellan

Central Coast & Blue Mountains

Gosford, Wyong, Springwood, Katoomba

FAQ

Frequently Asked Questions

Why does paving crack or sink on Western Sydney clay?

Usually because water gets under it. Reactive clay swells when wet and shrinks when dry, moving whatever sits on it. A compacted crushed sandstone or road base of the right depth, falls of 1:60 to 1:100 away from the house and drains that take water away keep paving stable.

Which sandstone colour stays coolest in a Western Sydney summer?

Lighter colours, such as Marbled White, White with Greys and Light Yellow, reflect more sun and stay cooler underfoot than darker Browns, Orange or Purples. Choose them for pool surrounds and west-facing patios.

How much crushed sandstone do I need under a driveway?

Multiply length x width x compacted depth in metres, then by 1.8–2.0. A 6m x 6m driveway with a 150mm base is 5.4m³, about 10–11 tonnes. The free crushed sandstone calculator works it out for any size.

Do I need approval for a retaining wall in a new Western Sydney estate?

Most NSW councils require approval for retaining walls over about 600mm or close to a boundary, and walls over about 1m need an engineer. Check with your council, whether Parramatta, Blacktown, Penrith or Cumberland, before ordering.

Can you match sandstone on an older Parramatta house?

New stone can be selected to sit beside it. Send photos of the existing stone with your quote request and the quarry selects a batch from the matching colour band; sandstone bricks and the sparrow-pecked finish suit heritage repairs.