Sutherland Shire & Southern Sydney

Sutherland Shire Sandstone Supplies

Stone Front supplies sandstone paving, pool coping, retaining blocks, billets and boulders to the Sutherland Shire and Southern Sydney, from Cronulla, Caringbah, Gymea, Como and Miranda to Engadine, Heathcote, Hurstville and Kogarah. The stone comes from our Glenorie quarry, with sawn modular paving from $65/m² and rough squared retaining blocks from $120/m² of wall face.

The Shire is really two landscapes. Along Port Hacking, Gunnamatta Bay, the Georges River and the Woronora, waterfront blocks fall steeply to the water and are terraced with walls and steps. Inland, from Engadine to Heathcote and Bundeena, bush blocks sit on the same sandstone country as the Royal National Park. North of the river, the St George suburbs are mostly established brick homes on flatter blocks. Sutherland Shire and Georges River councils cover most of the area.

Waterfront Gardens: Terraces and Steps to the Water

Waterfront blocks in Gymea Bay, Yowie Bay, Burraneer, Como and Oyster Bay usually need a series of terraces held by retaining walls, linked by sandstone steps down to the water. Rough squared blocks, from $120/m² of wall face, suit dry-stacked and mortared terrace walls; solid sawn block steps, typically 1000–1200mm long with a 150–175mm rise, link the levels.

Works close to the foreshore and higher walls need extra care. Most NSW councils require approval for retaining walls over about 600mm or close to a boundary, walls over about 1m need an engineer, and you should check with Sutherland Shire or Georges River Council before planning anything near the water. Stone usually has to be lifted down from the street by crane truck, so describe the fall of the block when you request a quote.

Retaining Walls: Blocks, Logs or Billets?

The right Shire retaining wall depends on height, access and machinery. Rough squared and rockfaced blocks can be laid by hand, allow curves and suit gardens where a machine cannot reach. Split logs, about 300x300mm, go in fastest with small machinery: a 10m wall 900mm high is 3 courses, 30 lineal metres and about 6 tonnes of logs.

Billets are large-format pieces for structural walls and are always machine placed; a 1,200 x 600 x 600mm billet weighs about 994kg. They suit high waterfront and cut-and-fill walls where an engineer has specified mass. Every option needs drainage behind it: an ag pipe at the base and free-draining backfill.

Pool Surrounds in the Shire

Backyard pools are a defining feature of Shire homes, and most sandstone pool surrounds use sandblasted or sawn pavers for grip with matching coping. Sawn all round pavers, 50mm thick from $120/m², come in 400x400, 600x400 and 600x600mm; coping is 30–40mm thick, 400mm or 500mm wide, with a bullnose or drop-face edge.

Lay the surround with a fall of about 1:60 to 1:100 away from the house, seal it with a sealer rated for salt and chlorinated water, and choose lighter colours such as Marbled White or Light Yellow if the pool area takes the afternoon sun.

Bush Blocks Near the Royal National Park

On bush blocks in Engadine, Heathcote, Loftus and Bundeena, quarried sandstone sits naturally beside the rock platforms already in the landscape. Boulders, from 1–2 man size to large feature rocks, build rockeries and informal steps; rough squared blocks can be dry-stacked with a rough split-top capping for a wall that looks like it belongs to the bush.

Crushed sandstone in 75mm minus compacts into a firm, free-draining path or driveway surface. Sandstone is non-combustible, which suits gardens on bushfire-prone land; check requirements for the house itself with your council and builder.

Southern Sydney: Driveways and Front Gardens

In Hurstville, Kogarah, Mortdale and the St George suburbs, most sandstone work is around established brick homes: front paths, low front walls and driveways. Use 75mm-thick paving at minimum where cars drive and 100mm for heavier vehicles or steep driveways; sawn modular paving comes in 50, 75 and 100mm and starts from $65/m² for 50mm.

Driveways need 150–200mm of compacted road base or a reinforced slab under the stone. Sandstone edging, from $35 per lineal metre, holds the edges, and rockfaced blocks with sawn capping make a neat low front wall. Many councils in the area have heritage conservation areas, so check before changing a frontage.

Current Stock

Sutherland Shire & Southern Sydney: Guide Prices

ProductFormatShire useGuide price
Sawn Modular Paving50, 75 or 100mmPatios at 50mm; driveways at 75–100mmFrom $65/m² (50mm)
Sawn All Round Pavers50mm; 400x400 to 600x600mmPool surrounds and terracesFrom $120/m²
Pool coping30–40mm; 400 or 500mm wideBullnose or drop-face pool edgesBy quote
Rough Squared BlocksAbout one-man sizeWaterfront terraces, dry-stacked wallsFrom $120/m² of wall face
Sandstone BilletsLarge format, about a tonne eachEngineered high retaining wallsBy quote
Crushed sandstone (75mm minus)Per tonneBush paths and paving baseBy quote

Guide prices are for stone only, ex-quarry at Glenorie, in AUD. Delivery and crane lifts are priced on the quote by suburb and access.

Applications

Where This Stone Works

Terraced waterfront gardens
Steps down to the water
Pool surrounds & coping
Engineered billet retaining walls
Bush-block rockeries & dry-stacked walls
Driveways in 75–100mm paving

Get a quote from Stone Front

Step 1 of 2

Tell us which sandstone you need, roughly how much and your suburb. We reply with a price and delivery cost, usually the same business day.

Delivery Areas

Sandstone Delivered Across Sydney

Every pallet leaves the quarry at Glenorie in the Hills District and is delivered by flatbed or crane truck to sites across greater Sydney, the Central Coast and the Blue Mountains. Tell us your suburb when you request a quote and delivery is priced with the stone. Quarry collection is free.

Hills District

Castle Hill, Kellyville, Dural, Glenorie (quarry)

North Shore

Chatswood, Mosman, St Ives, Hornsby

Northern Beaches

Manly, Dee Why, Mona Vale, Avalon

Eastern Suburbs

Bondi, Randwick, Vaucluse, Maroubra

Inner West

Marrickville, Leichhardt, Strathfield, Balmain

Sydney CBD & Inner City

Surry Hills, Paddington, Glebe, Pyrmont

Sutherland Shire & Southern Sydney

Cronulla, Miranda, Engadine, Hurstville

Western Sydney

Parramatta, Blacktown, Penrith, Rouse Hill

South West Sydney

Liverpool, Camden, Campbelltown, Narellan

Central Coast & Blue Mountains

Gosford, Wyong, Springwood, Katoomba

FAQ

Frequently Asked Questions

Do you deliver sandstone to the Sutherland Shire and Southern Sydney?

Yes. Stone Front delivers from Glenorie to the whole Shire and Southern Sydney, including Cronulla, Miranda, Engadine, Hurstville and the Georges River suburbs. Delivery is priced on the quote by suburb, truck type and access, and quotes usually come back the same business day.

What retaining wall suits a steep waterfront block?

Rough squared blocks suit terraces built by hand, split logs suit walls up to about 1m placed by small machinery, and billets suit higher engineered walls. Walls over about 600mm or near a boundary usually need approval, and walls over about 1m need an engineer.

Will quarried sandstone look right near the Royal National Park?

Yes. Glenorie sandstone is Sydney sandstone, so boulders, dry-stacked rough squared blocks and crushed sandstone paths sit naturally in bush gardens. For a closer colour match, ask for a single-colour selection or send photos of the rock on your block.

How thick should sandstone driveway pavers be?

Use 75mm minimum where cars drive and 100mm for heavier vehicles or steep driveways, on 150–200mm of compacted road base or a reinforced slab. Sawn modular paving is made in 50, 75 and 100mm thicknesses.